WATER BEADING RESULTS

Long-Lasting Ceramic Coating in Kent, WA

Person polishing a gray car’s rear fender in an auto shop, with a wheel and garage tools visible.

A Deeper Gloss That Beads Water

The first thing most owners notice after a ceramic coating in Kent, WA is how water behaves on the paint. Instead of sitting flat, water beads up and rolls off the surface, carrying dirt and road grime with it. That hydrophobic behavior is the payoff of a properly prepped and applied ceramic coating, and it is the reason washing becomes faster and less stressful on the paint week after week. Our ceramic coating packages resist UV fading, stand up to bird droppings and tree sap, and keep that deep, wet looking gloss for years rather than weeks. Our process follows the application standards outlined by the International Detailing Association. Every Turn 4 Detail ceramic coating job starts with paint correction, since a coating locks in whatever condition the paint is in when we apply it. We do not skip that step, and we do not cut corners on prep, because the long term look of your coating depends on it. Once the coating cures, most owners notice the biggest difference the first time it rains, when water slides easily off your paint. 

HOW DEEP DO YOU WANT TO GO

Ceramic Coating Packages

Entry

Starting at  $900


Turnaround approximately 1 day

Our Entry ceramic coating is the perfect introduction to long term gloss for daily drivers. It enhances depth and shine, delivers strong hydrophobic performance, and makes routine washing easier while resisting UV exposure and everyday contamination.

  • THIS PACKAGE INCLUDES:
    • 1-year coating
    • Single-stage paint correction
    • Headlights & taillights coated
    • Exterior vinyl & plastic trim coated
    • Exterior paint coated

Sweet Spot

Starting at $1,250


Turnaround approximately 1 day

Our Sweet Spot ceramic coating is our most popular package, striking the balance between performance, durability, and value. Deeper paint correction and a longer lasting coating give you richer gloss and easier upkeep than the Entry package.

  • THIS PACKAGE INCLUDES:
    • 2-year coating
    • Two-stage paint correction
    • Headlights & taillights coated
    • Exterior vinyl & plastic trim coated
    • Exterior paint coated

Premium

Starting at $1,500


Turnaround approximately 1 to 2 days

Our Premium ceramic coating is built for enthusiasts and long term owners who want the longest lasting formulation we offer, with exceptional gloss, strong hydrophobic behavior, and the easiest long term maintenance in our lineup.

  • THIS PACKAGE INCLUDES:
    • 5-year coating
    • Two-stage paint correction
    • Headlights & taillights coated
    • Exterior vinyl & plastic trim coated
    • Exterior paint coated
    • Topper ceramic coating applied for better performance and longer lifetime

Add-On Ceramic Services

Wheels-Off Ceramic Coating

Pricing provided upon consultation


We remove each wheel to thoroughly clean, decontaminate, and coat every accessible surface, guarding against brake dust, road grime, and heat while making wheel maintenance far easier between washes.

Glass Ceramic Coating

Pricing provided upon consultation


A dedicated ceramic layer on your windshield and exterior glass helps water bead and sheet away, improves visibility in wet weather, and reduces road film and bug buildup between cleanings.

PREP COMES FIRST

Built on Proper Preparation

A ceramic coating is only as good as the paint underneath it. That is why every Turn 4 Detail ceramic coating package in Kent, WA begins with a paint correction step, not just a wash. We start with a full decontamination wash and clay bar treatment to strip away embedded grime, then correct visible swirl marks and light scratches with a machine polish before the coating ever touches the surface. Skipping that step means sealing existing imperfections under a hard, long lasting layer, which only locks them in rather than fixing them. Once the paint is properly corrected, we apply the coating in a controlled environment and give it the cure time it needs before the vehicle leaves our shop, so the gloss you see on day one is the gloss you keep for years to come. We also inspect trim, plastics, and glass before application, since those surfaces get coated too on most of our packages and benefit from the same clean starting point as the paint.

Clear Recommendations, No Pressure

We will walk you through the difference between our Entry, Sweet Spot, and Premium packages so you can choose based on how you actually use your vehicle, not a sales script. A daily commuter that sits outside most of the time might benefit most from the added durability of Sweet Spot or Premium, while a garage kept weekend car may do just fine with Entry. We will also ask how you wash and store your vehicle, since that affects how long any of our packages continue to perform at their best. If you are pairing a coating with our paint correction or exterior detailing service, we will map out the right order of operations before we ever pick up a pad, so nothing gets rushed or skipped along the way. Most first time clients ask us how often they need to wash the vehicle once it is coated, and the honest answer is about the same as before, just with less effort each time since dirt no longer clings the way it used to.

Silver sports car parked on pavement in front of blue shipping containers

THE HYDROPHOBIC DIFFERENCE

What Makes Our Ceramic Coating Different

White checkmark inside a black circle icon on a white background

Hydrophobic Beading

Water beads up and rolls off the surface instead of sitting flat, carrying dirt along with it as it goes.

White checkmark inside a black circle icon

UV and Chemical Resistance

Our coatings resist fading from sun exposure and stand up to bird droppings, tree sap, and everyday road chemicals.

White checkmark inside a black circle icon

Deeper, Wet Look Gloss

Every package enhances depth and shine well beyond what bare paint or a wax alone can achieve.

01 CERAMIC COATING 02 PAINT CORRECTION 03 FULL DETAILING 04 INTERIOR DETAILING 05 EXTERIOR DETAILING 06 MAINTENANCE DETAILING 07 MOBILE DETAILING
Person wiping a black car door with a yellow cloth in a garage, showing bright reflections on the paint

BUILT FOR THE PNW

Why Ceramic Coating Matters in Washington's Weather

Kent, WA sees more rain than most parts of the country, and that constant moisture means water spots, road film, and mineral buildup are a daily reality for local drivers. A ceramic coating gives that rain somewhere to go instead of sitting on the paint, so it sheets off cleanly and takes grime along with it. When summer finally arrives, the same coating stands up to stronger UV exposure and the pollen and tree sap that come with the Pacific Northwest's evergreen surroundings, keeping your paint looking cared for through every season this region brings. Vehicles that sit outside through a full Kent winter and summer tend to show the difference most clearly, since the coating is working through both extremes rather than just one.

Frequently Asked Questions

  • How long does a ceramic coating last?

    Depending on the package and how the vehicle is maintained, our ceramic coatings can hold up for multiple years. Our Premium package uses an extended life formulation for owners who want the longest lasting result.

  • Do I need paint correction before a ceramic coating?

    Every Turn 4 Detail ceramic coating package includes a paint correction step, since the coating locks in the paint's current condition rather than fixing it.

  • Can I still wash my car normally after a ceramic coating?

    Washing actually gets easier. The hydrophobic surface releases dirt more readily, so a routine two bucket wash keeps the coating looking its best.

  • Do you use a specific coating brand?

    We keep our process brand neutral and focus on the application quality and prep work that determines how the coating performs and looks over time.